Chuck Metals is a well-established manufacturer and supplier of Stainless Steel 410 Bars and Rods in Singapore, serving various industrial sectors across Pulau Ujong and Southeast Asia. Stainless Steel 410 is a martensitic stainless steel known for its excellent hardness, strength, and wear resistance. It is ideal for applications requiring moderate corrosion resistance and high mechanical performance. Manufactured to standards like ASTM A276 and A479, our 410 bars and rods offer precise dimensions, superior surface finish, and consistent quality. Chuck Metals provides these bars in various sizes and heat-treated conditions to suit demanding engineering and fabrication needs.
Stainless Steel 410 Bars and Rods are primarily composed of 11.5–13.5% chromium and low carbon content (~0.15%), offering a good balance of strength and corrosion resistance. When heat-treated, they deliver tensile strength up to 700 MPa, yield strength around 275–450 MPa, and hardness up to 40 HRC. The alloy is magnetic, hardenable by heat treatment, and exhibits fair corrosion resistance in mildly corrosive environments. While it performs well in dry atmospheres and freshwater, it is less suitable for marine or highly acidic conditions.
| Specification | ASTM A479/ SA479 ASTM A276/ ASME SA276 |
|---|---|
| Grade | Stainless Steel 410 (UNS S41000) |
| Hex Bar size | 18 to 57mm (11/16″ – 2-3/4″) |
| Round bar size | OD 4mm to 500mm |
| Square bar size | 18mm to 47mm (11/16″- 1-3/4″) |
| Billet Size | 1/2″- 495mm Dia. |
| Rectangles Size | 33 x 30mm – 295 x 1066mm |
| Bright Bar | OD 4mm to 100mm |
| Tolerance | K12 H12, K10, H9, H11, H8, H13K9, H10, K11, or as per need |
| Flat bar size | 1/2” to 10” in thickness of 2 to 150mm |
| Angle bar size | 3*20*20~12*100*100 |
| Finish | centreless ground, Cold (bright) drawn, hot rolled, peeled, smooth turned, hot rolled annealed, slit rolled edge, Bright, Rough Turned, Grinding, Polish & Black |
| Form | Flat Bar, Hollow, Round, Square, Triangle, Rectangle, Half Round Bar, Rod, T-Bar, Precision Ground Bar, Hex (A/F), Blocks, Channel Bar, Threaded, Round Rod, Billet, Profiles, I/H Bar, Ingot, Rings, Forging etc. |
| Technique | 440C Stainless Steel Hot Rolled, Cold Drawn, Rod, Forged Round Bar, Cold Rolled |
| Condition | annealed, Hardened & tempered |
| Section | 3.0 -12.0 mm thickness, 80 x 40 to 150 x 75mm section |
| Channel Bar | 5.0 – 6.0mm thickness |
| Surface | Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Polished, Hairline |
| Hollow Bar | 32mm OD x 16mm ID – 250mm OD x 200mm ID |
| Element | S | Cr | Si | C | P | Mn | Ni |
| SS 410 | 0.030 | 11.5-13.5 | 1.00 | 0.15 | 0.040 | 1.00 | 0.75 |
| Elongation | Melting Point | Yield Strength (0.2%Offset) | Density | Tensile Strength |
| – | – | MPa – 275 | – | MPa – 480 |
| STANDARD | UNS | BS | EN | JIS | WERKSTOFF NR. | GOST | AFNOR |
| SS 410 | S41000 | 410S21 | 56A | SUS 410 | 1.4006 | – | – |
Stainless Steel 410 Bars and Rods offer excellent wear resistance, good corrosion resistance, and high strength. These properties make them suitable for applications that require strength and durability, such as in the aerospace, automotive, and food processing industries.
These bars and rods are widely used in industries such as petrochemical, chemical processing, power generation, and marine applications. They are also suitable for heat exchangers, boiler parts, furnace components, and high-temperature exhaust systems.
Stainless Steel 410 Bars and Rods are widely used in applications requiring high strength, wear resistance, and moderate corrosion resistance. Common uses include pump shafts, valves, fasteners, motor shafts, and cutting tools. In the automotive industry, 410 is employed for exhaust components and engine parts. The oil & gas sector uses these bars for drill collars and hard-wearing components. Additionally, they are used in power generation, machinery, and food processing equipment, where durability, machinability, and hardness are crucial performance factors.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chuck Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Singapore, Singapore
Copyright 2024 Chuck Metals. All rights reserved
