Chuck Metals stands out as a top manufacturer and supplier of Aluminium 2017 Forgings in Singapore, catering to a variety of engineering and industrial sectors throughout Pulau Ujong and Southeast Asia. Aluminium 2017 is a heat-treatable, high-strength alloy that’s well-regarded for its impressive machinability, solid fatigue resistance, and decent corrosion resistance. It belongs to the 2000 series of aluminum alloys, which are copper-based and commonly utilized in aerospace and structural applications. Our 2017 forgings meet ASTM B247 and other relevant industry standards, ensuring precise tolerances, a fantastic surface finish, and dependable mechanical properties for critical uses.
Typically, Aluminium 2017 Forgings contain 3.5–4.5% copper, 0.4–1.0% manganese, and 0.4–0.8% magnesium, along with trace amounts of iron, silicon, and zinc. This alloy boasts a tensile strength that ranges from 390–480 MPa and a yield strength of about 245–390 MPa, depending on the temper. It’s heat-treatable, which means it can achieve greater strength through precipitation hardening. While Aluminium 2017 offers good machinability, it’s not as corrosion-resistant as pure aluminum, so it might need protective coatings or anodizing in tough environments.
Standards : ASTM B247, B247
Temper : T6 T651 T6511
Specification : DIN, ASTM, BS and all International Standards
Flat bar blocks : up to 27″ width and 15,000 lbs.
Cylinders and sleeves : up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs : up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings : up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts : up to 144″ maximum length and 20,000 lbs.
| Grade | Al | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others Each | Other Total |
| 2017 | Rem | 0.20-0.8 | 0.7 max | 3.5-4.5 | 0.40-1.0 | 0.40-0.8 | 0.10 max | 0.25 max | 0.15 max | 0.05 max | 0.15 max |
| Material | Condition | Tensile Strength (N/mm²) min | Yield Strength | Elongation in 4D % | ||
| ksi | Mpa | ksi | Mpa | |||
| 2017 | 2017-T4 Bar | 55 | 379 | 32 | 221 | 12 |
| European Standard | OLD | WNr | UNS | ISO | USA (AA) | GERMANY (DIN) |
| AW-AlCu4MgSi | AU4G | 3.1325 | A92017 | AlCu4MgSi | 2017 | AlCuMg1 |
Aluminum 2017 is suitable for forging but has limited high-temperature resistance. For high-temperature forging applications, consider alloys with better heat resistance, like 2219 or 2618.
Aluminum 2017 offers high strength, excellent machinability, good corrosion resistance, and ease of welding, making it ideal for custom forgings in aerospace, military, and high-performance applications.
Aluminium 2017 Forgings are popular in aerospace structures, automotive parts, transportation fittings, and military-grade hardware, thanks to their excellent strength-to-weight ratio. You’ll find them in applications like aircraft fuselage frames, rivets, gears, shafts, and hydraulic valve components. They’re also used in marine settings, machinery, and sports equipment where strength, wear resistance, and fatigue performance are essential. Aluminium 2017 is perfect for situations that demand high-load capacity, great machinability, and stability in dimensions after heat treatment.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Chuck Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Singapore, Singapore
Copyright 2024 Chuck Metals. All rights reserved
